Eton
Eton MW 12 Inch Subwoofer High-Performance Bass
● In stock
Ask our Morayfield team about fitment, installation parts and labour pricing.
ETON MW 12 â 300mm Performance Subwoofer
Meet the ETON MW 12 â part of ETON's new MW Performance Series, built for one purpose: serious bass. Full power, rock-hard punches, and deep low-end runs that hit you in the chest. Whether you're chasing extreme SPL or just want bass with real fun factor, the MW 12 delivers without compromise â all at a price point that makes it a no-brainer upgrade.
Engineered in Germany and built with proven cone materials, heavy-duty dual voice coils, and an extremely powerful ferrite magnet system â the MW 12 is ready to perform at the highest level in a sealed or ported enclosure.
ð Key Features
- 300mm (12") pressed, air-dried paper cone â optimised for tight, accurate bass response
- Additionally stitched long-throw surround â handles extreme excursion without failure
- Powder-coated reinforced die-cast aluminium basket â torsion-resistant and built to last
- Open basket construction â maximum heat dissipation for sustained performance
- Heavy-duty 2x2Ω dual voice coil (76mm diameter) â with built-in ventilation for cool running
- Extremely strong ferrite magnet â with large pole core bore and additional ventilation holes
- High-quality clamp terminals â secure, vibration-resistant connections
- Engineered in Germany
ð Core Specifications
| Specification | Value |
|---|---|
| Impedance | 2 x 2 Ω (Dual Voice Coil) |
| Rated Power (RMS) | 900 W |
| Music Power | 1200 W |
| Sensitivity (1W/1m) | 86 dB |
| Outer Diameter | 326 mm |
| Cut-Out Diameter | 286 mm |
| Installation Depth | 175 mm |
| Voice Coil Diameter | 76 mm |
| Magnet Material | Ferrite |
| Xmax (Mechanical) | ±48.0 mm |
ð Thiele-Small Parameters
| Parameter | Symbol | Value |
|---|---|---|
| Nominal Impedance | Zn | 2 x 2 Ω |
| DC Resistance | Re | 3.8 Ω |
| Resonance Frequency | fs | 31.6 Hz |
| Total Q Factor | Qts | 0.30 |
| Electrical Q Factor | Qes | 0.32 |
| Mechanical Q Factor | Qms | 5.54 |
| Equivalent Air Volume | Vas | 24.93 dm ³ |
| Effective Piston Area | Sd | 491 cm ² |
| Force Factor | Bl | 29.39 Tm |
| Voice Coil Inductance | Le | 3.10 mH |
| Total Moving Mass | Mmd | 348.12 g |
| Suspension Compliance | Cms | 0.07 mm/N |
| Mechanical Resistance | Rms | 11.94 kg/s |
ð¡ Why the ETON MW 12?
The MW 12's low Qts of 0.30 makes it a natural fit for ported enclosures where you want authority and extension down low. The massive ±48mm Xmax means this driver can move serious air without bottoming out â even at full rated power. Pair it with a quality monoblock amp in the 600â900W RMS range and you've got a system that'll absolutely thump.
Unlike budget subs that cut corners on the basket and magnet, ETON builds the MW 12 from the ground up with German engineering standards â proper materials, proper construction, proper sound.
ð Garage Audio â Unit 3, 289-339 Morayfield Rd, Morayfield QLD 4506
ð 07 3093 1846 | Professional installation available in-store.
ð¬ DM us or call to discuss the right enclosure and amplifier match for your build.

Specifications
Garage Audio Product Guide
Everything You Need to Know
Our Expert Opinion
Garage Audio Review
Performance Ratings
How We Rate It
Buying Advice
Is This Product Right for You?
Best For
Things to Consider
Product Information
Audio Specifications
- Power Rating
- RMS Power
- 700 W
- Peak Power
- 800 W
- Recommended Amplifier
- Speaker Size
- Impedance
- 4 Ohm
- Audio Type
- Product Role
- Brand
Professional Installation Available
Get It Professionally Installed by Garage Audio
Visit our Morayfield workshop for expert product advice, vehicle-specific fitting and our lifetime workmanship guarantee.